INDOOR FLAGPOLES
 PARADE FLAGPOLES
 TIMBER FLAGPOLES
 FLAGPOLES
 WINDSOCK POLES
 WINDSOCK FRAMES
 WINDSOCKS
 WALL FLAGPOLES
 PORTABLE POLES
 BANNER POLES
 TABLE FLAGS
 HANDWAVERS
 AUSTRALIAN FLAGS
 ABORIGINAL FLAGS
 NAIDOC FLAGS
 SEWN FLAGS
 WORLD FLAGS
 GENERAL FLAGS
 RAAF FLAGS
 RAN FLAGS
 RSL FLAGS
 POLICE FLAGS
 CYCLONE FLAGS
 BALI FLAGS
 FLAGPOLE FINIALS
 FLAGPOLE PARTS
 FLAGPOLE STANDS
 FLAGPOLE REPAIRS
 FLAG HOLSTERS
 FLAG FABRICS
 FLAG FITTINGS
 FLAG HIRE
 FLAG GALLERY
 

Retail Flagpoles

WINDSOCK POLES

Windsock poles along with our marine grade Stainless Steel windsock frames, allow for accurate wind directional readings. Models include, portable windsock pole, wall mount windsock pole, ln ground windsock poles, hinged windsock poles, roof mount windsock poles, removable skid mount windsock poles, worksafe approved for OH&S regulations. Easily installed at any LNG operation, work site, mine, water treatment plant, petroleum refinery, coal seam gas, refrigeration or chemical storage facilities.


Windsock Pole With 316 Marine Grade Stainless Steel Windsock Frame High Quality Windsock By Adwareflags.com
 


Manufactured from the highest quality anodised aluminium or polished stainless steel tube, with optional heavy duty galvanised steel installation mountings. Solid marine grade 316 hardened stainless steel windsock frame, high strength stainless steel tig welding, 2 internal heavy duty Nyglide bearings with precision 360 degree windsock frame rotation, highly polished windsock swivel frame & 316 stainless steel top cap.  No maintenance required, supplied complete with 25 Year windsock frame warranty.
 

  MODEL  

  HEIGHT     DIA   SECT  

      ALUMINIUM     

   MOUNTING   

WP360A

3 MTR

 60MM 

1

ANODISED

 OPTIONAL

 WP460A 

4 MTR

60MM

1

  ANODISED  

 OPTIONAL

 WP560A 

  5 MTR  

60MM

 

ANODISED

 OPTIONAL 

 WP380A 

  3 MTR  

80MM

 

 ANODISED 

 OPTIONAL 

WP480A

4 MTR

80MM 1 ANODISED OPTIONAL
WP580A

5 MTR

80MM 1 ANODISED OPTIONAL
WP680A 6 MTR 80MM 1 ANODISED OPTIONAL
WP780A 7 MTR 80MM 1 ANODISED OPTIONAL
WP5100A  5 MTR  100MM   1  ANODISED  OPTIONAL 
WP6100A   6 MTR   100MM  1 ANODISED OPTIONAL 
WP7100A   7 MTR   100MM  1 ANOSIDED  OPTIONAL 
WP8100A  8 MTR 100MM  1  ANODISED  OPTIONAL
WP9100A  9 MTR 100MM  1 ANODISED OPTIONAL
 

MODEL

   HEIGHT    DIA   SECT  

 STAINLESS STEEL

   MOUNTING   

WP380S

3 MTR

 80MM 

1

POLISHED

 OPTIONAL

 WP480S 

4 MTR

80MM

1

  POLISHED  

 OPTIONAL

 WP580S 

  5 MTR  

80MM

 

POLISHED

 OPTIONAL 

 WP680S 

    6 MTR  

80MM

 

 POLISHED 

 OPTIONAL 

WP4100S 4 MTR 100MM 1 POLISHED OPTIONAL
WP5100S  5 MTR 100MM  1  POLISHED  OPTIONAL 
WP6100S  6 MTR  100MM  1   POLISHED  OPTIONAL 
  
OPTIONAL WINDSOCK POLE MOUNTINGS

Hinged Windsock Pole Base Pivoting Windsock Pole Base Tilt Down Windsock Pole Base Cantilever Windsock Pole By Adwareflags.com
HPB01
HINGED PIVOTING BASE

Wall Mount Windsock Pole Brackets For Concrete & Brick Walls Or Building Facades Heavy Duty Galvanised Steel By Adwareflags.com
WMB02
WALL MOUNT BRACKETS


Windsock Pole Bolt Directly To Concrete Or Install With Cage Bolt & Template For In ground Concrete Footing Galvanised Steel By Adwareflags.com
BCB03
BOLT TO CONCRETE BASE


Windsock Pole Cage Bolt Assembly Welded Construction, Used With For Concrete Footing Hinged Tilt Base & Standard Base Plate Installation Galvanised
CBA04
CAGE BOLT ASSEMBLY

Windsock Pole Timber Cage Bolt Installation Template, Provides A Level Pad For Hinged Base & Standard Base Plate Installation
IT005
INSTALLATION TEMPLATE

Windsock Pole In Ground Installation Spigot Tube Set Directly In To Concrete Footing Galvanised Steel By Adwareflags.com
IST06
INGROUND SPIGOT TUBE


HINGED WINDSOCK POLE BASE

Hinged base windsock poles or pivoting windsock poles, are also known as folding, tilting, cantilever base, or tilt down see-saw windsock poles, are ideal for all sites. When it comes to windsock poles, our superior designed, precision laser cut steel hinged bases allows for fast, work safe and simple windsock replacement anytime. No more cherry pickers, travel towers or boom lifts required. Hinged base windsock poles are installed in combination with our welded inground cage bolt assemblies & timber installation templates. Super heavy duty high tensile strength aluminium or polished stainless steel windsock poles, structural engineer certified to withstand cyclonic winds, category 1 - 5. Suitable for A1- A5. B. C. D. regions of Australia.
 
WALL MOUNT BRACKETS

Wall mount or wall mountable windsock poles come complete with a set of heavy duty galvanised steel wall brackets, designed to facilitate ease of installation and provide lasting corrosion resistance. Easily affixed to brick walls, concrete tilt slab walls, building facades and virtually any suitable structure such as, onsite shipping containers or drilling machinery skids. Wall mountable windsock poles come with an additional aluminium tube, which is used as a template to correctly set & pre affix the wall brackets in place prior to final fitting & fixing of the windsock pole itself.  The use of the supplied template tube is considered far safer when installing wall mounted windsock pole brackets or fixing windsock poles when working at heights.
   
BOLT TO CONCRETE BASE 

These fully galvanised universal, dual purpose windsock pole bases can be utilised   as a standard base with an inground cage bolt assembly, or alternatively, bolted directly to a suitable industrial grade concrete base via stainless steel Dyna Bolts. Direct bolt to concrete windsock pole installations are only utilised for industrial or commercial hard areas, building rooftops, airports, aviation landing strips, helipads, or where a suitable concrete base is available or specified by architects for above ground windsock pole installations. The feasibility of a bolt to concrete windsock pole installation should be considered via consultation with a qualified structural engineer to ascertain the concrete base's depth, strength and stability required.
 
CAGE BOLT ASSEMBLY 

Our superior designed and manufactured windsock pole cage bolt assemblies are precision welded, forming a single heavy duty inground installation box frame of galvanised steel. Unlike inferior hard to install J bolt systems, our box cage frames are easy to install when used in conjunction with our timber installation templates. Being of a box type construction, they provide super high strength and will remain permanently fixed without movement within the concrete footing. Additionally, we recommend that three pieces of Rio Mesh be used at the bottom, centre & below     the top of the concrete footing, or foundation. Steel Rio Mesh provides additional reinforcement to the concrete, ensuring protection against cracking and reduction   of possible movement of the concrete footing in clay or certain type sub-soils. All    above ground cage bolt components, including steel lock nuts and washers are also galvanised, meaning no parts of the windsock poles cage frame or base plate are subject to any movement, rust or corrosion. Therefore offering the most superior, durable, reliable and professional windsock pole installation available in Australia.
 
INSTALLATION TEMPLATE 


Our unique windsock installation templates are used in conjunction with cage bolt assemblies. They are a simple and reliable installation method providing several benefits. Firstly, the template allows the setting required for the correct cage frame thread height to be attained by adjusting the washers and nuts on top of the template itself. Secondly, it helps form the top of the curing concrete into a flat square base pad by means of levelling across the board during installation while the concrete is wet. Once the concrete has cured, the template is removed, revealing a perfectly level flat pad for the windsock pole hinged base or fixed base plate. Always use structural grade concrete for windsock pole footings and allow concrete to cure before the windsock pole is set up or installed.

INGROUND SPIGOT TUBE 

Inground spigot tubes are suitable for lower height windsock poles, or as a more economical means of installation. Firstly, the ground is excavated and concrete is poured. Next, the spigot tube is set into the windsock poles footing center at the correct depth. After this, the spigot tube is then levelled and braced using timber at all opposite points, then retained in place until the concrete has fully cured.
Once the concrete has cured, the windsock pole is raised over the internal spigot tube & pushed down to the bottom of the footing. Final fixing the pole via, rivet.
  
WINDSOCK POLE COMPONENTS 

T
 
ANODISED FINISH 

Our windsock poles are supplied with a superior marine grade 20 micron anodised finish, providing the most durable and corrosion resistant finish available. Anodised finishes are unique, as the finish itself is directly etched into the aluminium surface, therefore offering a far superior, complete internal and external resistance to any oxidisation or corrosion. Anodised finishes are especially important within a marine environment, seaport area or coastal region and are regarded as a first class finish.
Conversely, a powder coated or painted windsock pole is classed as an external surface finish only, offering a greatly reduced resistance to oxidisation and internal corrosion along with low external wear, chip and abrasion resistance. Other factors such as UV light, will overtime, further deteriorate a painted or powder coated finish thus, resulting in a poor worn off finish or a delaminating dull powder dry like finish. Our marine grade anodised windsock poles are simply the best you can buy!
 

 


Windsock poles are manufactured from T6-6063 or T6-6082 high tensile aluminium.  To Australian standards AS1170.1 - 2002, AS1170.2 -2011 Wind Loadings.
AS1664.2 -1997 Aluminium Structures Code, AS4100-1998 Steel Structures Code.

AS4680 - 2006 Hot-dip Galvanised (zinc) coatings on ferrous steel articles.
AS1554.1 - 2004 Structural Steel Welding or Welding of Steel Structures.




S
EE OUR RANGE OF QUALTIY WINDSOCKS


Adwareflags.com Official Australian Made Licensee. Manufacturers of superior quality Flag & Flagpoe Products. Distributors Australia Wide.

Adwareflags.com Official Registered Suppliers to the Department of Defence Registered ADO/DMO LoRS


MELBOURNE VIC, SYDNEY NSW, CANBERRA ACT, BRISBANE QLD, DARWIN NT,

PERTH WA, ADELAIDE SA, HOBART TAS


                              Copyright © 2012, Adware Flags & Flagpoles   Maintained by Indiana Productions