|
|
|
NAIDOC FLAGS |
NAIDOC Week celebrations are held across Australia each July to acknowledge the cultures and great achievements of the Aboriginal & Torres Strait Islander peoples. During NAIDOC Week indigenous flags are proudly displayed & flown on flagpoles across all cities and towns, representing a part of Australia's rich cultural history.
|
|
NAIDOC Australian Flags
The finest quality screen printed Australian flags available in high sheen knitted polyester, woven polyester or fully sewn woven bunting; double stitched M40 UV resistant thread; heavy-duty flag header, supplied complete with nylon flag clips.
AUSTRALIAN FLAG SIZES
915mm x 460mm |
1375mm x 685mm |
1800mm x 900mm |
2285mm x 1145mm |
2735mm x 1470mm |
3600mm x 1800mm |
4575mm x 2285mm |
5490mm x 2745mm |
6405mm x 3200mm |
7320mm x 3660mm |
8240mm x 4120mm |
9150mm x 4575mm |
|
|
|
NAIDOC Aboriginal Flags
The finest quality screen printed Aboriginal flags available in high sheen knitted polyester, woven polyester or fully sewn woven bunting; double stitched M40 UV resistant thread, heavy-duty flag header, supplied complete with nylon flag clips.
ABORIGINAL FLAG SIZES
915mm x 460mm |
1375mm x 685mm |
1800mm x 900mm |
2285mm x 1145mm |
2735mm x 1470mm |
3600mm x 1800mm |
4575mm x 2285mm |
5490mm x 2745mm |
6405mm x 3200mm |
7320mm x 3660mm |
8240mm x 4120mm |
9150mm x 4575mm |
|
|
|
NAIDOC Torres Strait Island Flags
The finest quality screen printed Torres Strait Island flags available in high sheen knitted polyester, Woven polyester or fully sewn woven bunting; double stitched with M40 UV resistant thread; heavy duty flag header, supplied nylon flag clips.
TORRES STRAIT ISLAND FLAG SIZES
915mm x 460mm |
1375mm x 685mm |
1800mm x 900mm |
2285mm x 1145mm |
2735mm x 1470mm |
3600mm x 1800mm |
4575mm x 2285mm |
5490mm x 2745mm |
6405mm x 3200mm |
7320mm x 3660mm |
8240mm x 4120mm |
9150mm x 4575mm |
|
NAIDOC TABLE FLAGS
NAIDOC TABLE FLAGPOLE SET
|
NAIDOC TABLE FLAGS SET
|
NAIDOC INDOOR FLAG STANDS
|
FS3
|
NAIDOC Flagpoles with the Australian, Aboriginal and Torres Strait Islander Flags. A perfectly proportioned model with two part flagpoles, steel flagpole floor stand black satin lacquer finish, gold abs acorn finials and gold joiners. Ideal for NAIDOC flag displays at Schools, or official NAIDOC ceremonies and NAIDOC Day events. When fitted with our screw apart flagpole joiners, these flagpoles can be easily removed from the flagpoles base and used for NAIDOC Day marches and NAIDOC parades. Official Licenced Flags 1800mm x 900mm. Flagpole assembly 2400mm H.
|
IND3
|
This superior quality NAIDOC indoor Flagpole set is first choice when a grand flag display is required. Features include: Solid hardwood flagpoles, bevelled edge removable base, stained & satin lacquer finished, two angled flagpole ports, and one vertical port, polished brass screw together flagpole joiners and gold acorn finials. Our high quality screw apart flagpole joiners, enable flagpoles to be easily removed from the base and used for NAIDOC Day marches and NAIDOC street parades. Perfect as NAIDOC flag sets or for NAIDOC flag ceremony and functions. Suppliers of Australian flags, Indigenous Torres Strait & Aboriginal NAIDOC flags. Available in Oak, Maple, Teak, Jarrah, Walnut, Mahogany, Rosewood and Black. Official licenced flags 1800mm x 900mm. Flagpole set assembly 2400mm H.
|
SEE OUR QUALITY INDOOR FLAGPOLES
|
All pages & Images protected by ( DIGITRACK ™ ) digital water mark technology.
Any infringement upon Copyright © Registered Product Designs ® Trademarks ™ Sealed Patents or any Intellectual Property Rights whatsoever shall be legally contested forthwith without notice.
|
CUSTOM FLAGS
|
|
|
No Longer Available |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All pages & Images protected by ( DIGITRACK ™ ) digital water mark technology.
Any infringement upon Copyright © Registered Product Designs ® Trademarks ™ Sealed Patents or any Intellectual Property Rights whatsoever shall be legally contested forthwith without notice.
|
|
ADF FLAGS |
Please refer to Sewn Flags Page See link below
|
|
|
|
SEE OUR QUALITY SEWN FLAGS
|
All pages & Images protected by ( DIGITRACK ™ ) digital water mark technology.
Any infringement upon Copyright © Registered Product Designs ® Trademarks ™ Sealed Patents or any Intellectual Property Rights whatsoever shall be legally contested forthwith without notice.
|
|
FLAG FITTINGS |
A guide showing the most commonly used flag fittings & clips to attach flags to a flagpole rope or halyard. The word halyard is a marine term meaning, a rope used to hoist and lower a sail or flag. Below we detail the features and benefits of various flag fitting types along with how to professionally join a flagpole rope.
Standard Flag Clips
|
Today these flag clips are most commonly used, they are also called sister clips. Made from high quality UV resistant nylon, they offer excellent durability and low halyard noise when hoisted. Simply attach one to each flag loop and two on the flagpoles rope via a basic hitch knot, connect together and hoist your flag. The tension between the flag and rope should be slightly loose, allowing flags to fly.
Flagpole Snap Clips
|
Flag snap clips are used for simple fast flag hoisting, along with flags fitted with eyelets. These economical nylon snap clips offer excellent durability and low halyard noise when hoisted. Simply attach two clips to the flagpole's rope via a basic hitch knot and snap on to both flag loops, and hoist your flag. The tension between the flag and flag clips should be slightly loose allowing flags to fly easily.
Flag Swivel Clips
|
Flag swivel clips made from durable UV resistant nylon, are the same as standard flag clips except that one clip has a unique swivel feature, thus reducing flagpole rope twisting and fatigue. Simply attach one standard flag clip to each flag loop and two swivel clips to the flagpoles rope via a basic hitch knot, then connect together and hoist your flag. The tension between the flags header and flagpoles rope should be slightly loose allowing flags to catch the breeze and easily fly.
Flag Screw Lock Clips
|
Flag screw lock clips, also called flag security shackels, are also made from high quality UV resistant nylon. Their purpose is to reduce the ease of flag removal from a flagpole halyard via a stainless steel screw, locking the shackle shut. Flags can be easily changed with the use of a special screw driver. Simply attach two screw lock clips to the flagpoles rope via a basic hitch knot, connect each flag loop and lock the clip shut via the screw & hoist your flag. The tension between the flags header and flagpoles rope should be slightly loose allowing flags to fly.
Metal Flag Clips
|
Traditional metal or steel flag clips have been used for many years. They offer high strength and are commonly used in the restoration of period timber flagpoles or, as original replacement flag clips. Although this type of flag clip is very strong, eventually they rust and wear out. Metal flag clips have poor wear resistance & can leave flags marked with rust after rain. Simply attach one to each flag loop and two on the flagpoles rope via a basic hitch knot, connect together and hoist your flag. Tension between the flag and rope should be loose allowing flags to fly.
Flag Clips Stainless Steel
|
Stainless steel 316 marine grade flag clips the most corossion resistant type of flag clips available. Suitable for flagpoles in coastal locations, or prone to high winds, super strong, durable long life flag clips. Simply attach two clips to the flags loops and two clips to the flagpoles rope via, a basic hitch knot and slide together and hoist your flag. The tension between the flags header and flag clips should be slightly loose allowing flags to easily catch the breeze and fly correctly.
Flag Clips For Large Flags
|
Large flags require super high strength 316 stainless steel flag clips, due to the phyisical weight of these flags and the excessive wind forces, that they can be subjected to. These flag clips also have excellent corossion resistance. Ideal for flagpoles in coastal arears, durable long life flag clips suitable for 6mm - 8mm or 10mm flagpole rope sizes. Simply attach two clips to the flag and two clips to the flagpoles rope via, a basic hitch knot and slide together and hoist your flag. The tension between the flag clips should be slightly loose so flags to can easily fly.
Flag Clips Flagpole Security Wire
|
Specially designed security type stainless steel flag clips, with wire flagpole rope and stainless steel wire grips. These flag clips are widely used to deter vandals from flag theft, where flags may be flown constantly overnight on external type flagpole halyards. This 316 grade flagpole wire is super hardend, difficult to cut and the most flexible available. Fully adjustable wire grips enable any flag sizes. This type of flagpole wire halyard is also normally fixed with a solid stainless steel ring and padlocked to the flagpole at ground level, or higher for added security.
Flag Snap Clips Stainless Steel
|
Stainless steel flag snap clips are used for fast interchangable flag hoistings, as well as flags fitted with eyelets. These highly durable clips are made from marine grade 316 stainless steel, which is the hardest most corossion resistant type of clip. Widely used by the Royal Australian Navy and yachting industry, they are ideal for flagpoles near coastal locations, or simply for their high strength and long life. Simply attach two clips to the flagpoles rope via a basic knot and snap on to both flag loops and hoist your flag. The tension between the flag and flag clips should be slightly loose allowing flags to catch the breeze and easily fly.
Flagpole Snap Clip & Ring
|
Stainless steel snap clips and rings made from 316 marine grade stainless which is the hardest most corossion resistant type of flag clip. Ideal for flagpoles near coastal locations, or simply for high strength and durable long life. Simply attach two clips to the flag and two rings to the flagpoles rope via, a basic hitch knot and snap on to rings and hoist your flag. The tension between the flag and flag clips should be slightly loose allowing flags to catch the breeze and easily fly.
Flagpole Rope Shackle & Ring
|
Stainless steel heavy duty flagpole rope shackle and ring, marine grade 316 used for flying large flags that require high strength attachment, along with added flag security by means of tightened shackles. Durable long life simply attach two rings to the flag loops and two shackles to the flagpoles rope via a basic hitch knot, connect the rings and hoist your flag. The tension between the flag and flag clips should be slightly loose allowing flags to catch the breeze and easily fly.
How To Attach Flag Clips
|
One of the most simple ways of fitting or attaching flag clips to a flagpole rope, is via a hitch knot. Once the flag clips are tied this type of knot is easilly adjustable if needed to suit all required flag sizes and flag header tensioning. This type of flagpole rope tying method is detailed above with all flagpole rope instructions.
Left of picture: shows a basic loop formed and thread through the flag clips eye. Middle of picture: Shows this loop being drawn back over the flag clip towards the flagpole rope.
Right of picture: shows loop drawn back and tightened creating a finished knot.
How To Join A Flagpole Rope
|
Firstly the most important factor regarding the life of any flagpole rope is to use the highest quality marine grade double braided polyester rope. This type of rope is super strong, naturally UV resistant, repels water and will out last any other.
Top of picture shows a flagpole rope that has been joined using a flagpole rope joiner, also called a flagpole rope crimp or flagpole rope splice clip.
Middle of picture shows a heat shrink tube, used to cover any sharp edges that a rope splice clip may have, thus preventing wear to flagpole finishes and possible cuts to hands when hoisting and lowering your flags.
Bottom of picture shows finished joined flagpole rope with heat shrink cover.
Directions: First make sure your flagpole rope is heat cut to your required length leave some extra, as most ropes shrink over time due to outdoor exposure, then slide a piece of heat shrink tube over one end of the rope before crimping.
Next place each end of the rope in the splice clip making sure that the ends of the rope are slightly pertruding and have been heat sealed by hot knife or lighter. Then, using pliers or multi grips, crimp the splice clip evenly down over each rope end completely with no gaps, so it will fit inside the heat shrink tube.
Finally slide the heat shrink tube evenly over the crimped flagpole rope joiner and apply heat via a lighter, heat gun or butane gas torch. Make sure, as you heat it, to keep the tube turning as it starts to shrink down over the flagpole rope joiner. Do not apply any direct end flame to the shrink tube or flagpole rope, use heat from the side of the flame otherwise it can melt or discolour.
For other flagpole rope repair or flagpole rope rigging information, please feel free to contact us by phone, as you are welcome to our professional advice anytime.
All pages & Images protected by ( DIGITRACK ™ ) digital water mark technology.
Any infringement upon Copyright © Registered Product Designs ® Trademarks ™ Sealed Patents or any Intellectual Property Rights whatsoever shall be legally contested forthwith without notice.
|
SATIN FLAGS |
Adware manufacture the finest quality hand sewn satin flags available in Australia. Carefully crafted from lustrous high sheen satin flag fabric, perfectly appliqued and double sided, these flags truly offer the most beautiful type of indoor display flag or the ultimate ceremonial, parade & marching flags, or as presentation framed flags. Simply the most superior Australian made satin flags finished to perfection, to suit all outdoor flagpoles with flag clips or fitted with pole sleeves for indoor flagpoles.
|
The finest quality fully sewn & appliqued Australian National Flags, finely crafted in high sheen satin flag fabric. Double stitched with M40 UV Resistant bonded Nylon thread, along with durable overlocked appliqued stars, heavy duty flag header, internal rope fitted with your choice of white Nylon flag clips, metal flag clips or stainless steel flag clips, or optional white flagpole sleeves for all indoor flagpoles. |
AUSTRALIAN SATIN FLAG SIZES
915mm x 460mm |
1375mm x 685mm |
1800mm x 900mm |
2285mm x 1185mm |
2735mm x 1470mm |
3600mm x 1800mm |
4575mm x 2285mm |
5490mm x 2745mm |
6405mm x 3200mm |
7320mm x 3660mm |
8240mm x 4120mm |
9150mm x 4575mm |
|
|
The finest quality fully hand sewn & appliqued Royal Australian Naval Flags, finely crafted in high sheen satin flag fabric. Double sided and double stitched with M40 UV Resistant bonded Nylon thread, along with durable overlocked appliqued Navy Blue stars, heavy duty flag header, internal rope fitted with a selection of either white Nylon flag clips, stainless steel flag clips, or optional white flagpole sleeves for Royal Australian Naval Establishments or official ADF indoor flagpole displays. |
ROYAL AUSTRALIAN NAVY SATIN FLAG SIZES
915mm x 460mm |
1375mm x 685mm |
1800mm x 900mm |
2285mm x 1185mm |
2735mm x 1470mm |
3600mm x 1800mm |
4575mm x 2285mm |
5490mm x 2745mm |
6405mm x 3200mm |
7320mm x 3660mm |
8240mm x 4120mm |
9150mm x 4575mm |
The finest quality fully hand sewn and appliqued Royal Australian Air Force Flags, finely crafted using high sheen satin flag fabric. Double sided and double stitched with M40 UV Resistant bonded Nylon thread, along with durable appliqued and overlocked roundel and stars, heavy duty flag header, internal rope fitted with a selection of either white Nylon flag clips, metal flag clips, stainless steel flag clips, & optional flagpole sleeves for RAAF Bases or official ADF indoor flagpole displays.
|
ROYAL AUSTRALIAN AIR FORCE SATIN FLAG SIZES
915mm x 460mm |
1375mm x 685mm |
1800mm x 900mm |
2285mm x 1185mm |
2735mm x 1470mm |
3600mm x 1800mm |
4575mm x 2285mm |
5490mm x 2745mm |
6405mm x 3200mm |
7320mm x 3660mm |
8240mm x 4120mm |
9150mm x 4575mm |
|
SEE OUR QUALITY FULLY SEWN WOVEN FLAGS
|
All pages & Images protected by ( DIGITRACK ™ ) digital water mark technology.
Any infringement upon Copyright © Registered Product Designs ® Trademarks ™ Sealed Patents or any Intellectual Property Rights whatsoever shall be legally contested forthwith without notice.
|
|
|
|
|